TM 5-1940-322-24
0166 00
TRANSMISSION REPAIR (Contd)
INSTALLATION
1.
Apply light coat of oil to two piston rings (3) and install piston rings (3) in grooves of clutch shafts (4) and (6).
CAUTION
Take care when installing manifold not to damage front piston
rings as they enter the manifold bores. Failure to comply may
result in damage to equipment.
2.
Install new gasket (7) and manifold (2) on rear housing (5) with five screws (1). Tighten screws (1) to
19 lb-ft (26 Nm).
CAUTION
When installing oil pump, ensure that oil pump drive tang is
engaged correctly in slot in reverse clutch shaft. Failure to comply
may result in damage to equipment.
3.
Install new gasket (10) and oil pump (9) on manifold (2) with four screws (8). Tighten screws (8) to
19 lb-ft (26 Nm).
4.
Install filter screen (13), O-ring (12), and plug (11) on manifold (2).
5.
Install oil gauge tube (16), adapter (14), and filler/breather plug (15) on rear housing (5).
6.
Install transmission adapter plate (WP 0120 00).
7.
Before installing transmission on engine, check flywheel and flywheel housing alignment. (Refer to
8.
Install transmission (WP 0125 00).
8
1
2
9
10
3
7
4
5
6
2
3
5
0166 00-20
