TM5-2090-202-12&P
TM 2090-12&P/1A
3-12. TIE-DOWN CABLE ASSEMBLIES MAINTENANCE INSTRUCTIONS - Continued
INITIAL SETUP - Continued
Materials/Parts
Cleaning solvent
(Federal specification P-D-680)
Bristle brush
Wire brush
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
1.
Tie-down
a.
Quick release pin (1)
Remove
Repeat procedures in
this paragraph for
other five tie-down
cables as needed.
b.
Clevis (2)
Disconnect
c.
Cable assembly (3)
Remove
CLEAN, INSPECT AND REPAIR
2.
Quick release pin (1)
a.
Inspect for wear,
turnbuckle (4), and
breaks
thimble (5)
b.
Replace part if it
shows any of these
defects.
3-9
