TM 5-2090-202-12&P
TM 2090-12&P/1A
3-18. DOLLY ASSEMBLY MAINTENANCE INSTRUCTIONS-Continued
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
NOTE
The saddle is removed from the dolly assembly before the dolly assembly is removed
from the cradle. This makes the removal of the dolly from the cradle easier.
1.
Saddle and pivot shaft
assembly
a.
Two cotter pins (1)
and shaft (2)
WARNING
Support the saddle when removing shaft. Failure to do so may result in
injury to personnel or damage to equipment.
b.
Two spacers (3)
Remove
c.
Saddle (4)
Remove
2.
Stanchions
a.
Nut (5) and bolt (6)
Remove
b.
Stanchion (7)
Remove
c.
Rubber Bumper (8)
Remove screw (9) and
Repeat steps a through
washer (10).
c for the other stanchion.
3.
Saddle rubber pads
a.
8 nuts (11), lock
Remove
washers (12), cap-
screws (13) and
washers (14).
b.
Pad (15)
Scrape off
Repeat steps a and b
for the other pad.
3-33
