TM 5-2090-202-12&P
TM 2090-12&P/1A
3-18. DOLLY ASSEMBLY-MAINTENANCE INSTRUCTIONS-Continued
LOCATION/ITEM
ACTION
REMARKS
CLEANING, INSPECTION, AND REPAIR
7.
Saddle and rubber pads
a.
Inspect pads. Look
Make sure bolt heads
for wear down to
are below the rubber
bolt heads, loose
pad.
or deteriorated
rubber, or tears
in excess of three
inches.
b.
Replace if pad shows
Removal instructions
any of these
defects.
c.
Clean dirt, grease,
etc. from pad by
wiping with a soft
cloth.
d.
Thoroughly wash pad
with water and a
mild soap.
e.
Rinse off all soap
with water.
f.
Allow to dry.
Repeat steps a through
f for the other pad.
8.
Stanchions
Inspect for cracks,
dents, or signs of
damage. Replace if
any defects are
found.
9.
Dolly assembly
a.
Saddle
a.
Inspect for:
cracks, dents or
signs of damage.
b.
Replace saddle if
it shows any of
these defects.
3-38
