TM 5-3815-228-12&P
14.
Install Handrails to Post.
a.
Remove the hand tightened 1/4 x 20 x 3" screw/ washer/ nut combination from the handrail (13228E-9997)
mounting hole. Slide the Handrail (13228E-9997) out of the Handrail (13229E-9998) and into the pipe receiver on the
Post (13228E-9996) .
b.
Align the mounting holes and insert (1) 1/4-20 x 3" screw through a flat washer (MS27183-52) and through the
mounting holes in both handrails. Install a flat washer (MS27183-52) and a self locking nuts and tighten.
c. Repeat for the other three Handrails (13228E-9997).
END OF TASK
DISASSEMBLY
1.
Disassembly.
To disassemble the Catwalk for crating and shipment reverse the assembly procedures.
2.
Storage of Hardware for Shipping.
a.
To avoid loss or shortages of the mounting hardware put the 1/4" and the 1/2" screw/ washers/ nut
combinations into their respective mounting holes in each component as each section or part of the
Catwalk assembly is disconnected. Tighten enough to secure hardware on component.
b.
Secure the chain lengths by attaching one end to a post hook and wrapping the chain around the post.
c.
Package the components in its shipping crate and follow standard shipping procedures.
END OF TASK
2-4
