TM 5-5420-202-20-2
AIR CLEANER REPLACEMENT (Sheet 7 of 8)
10.
Place fender skirt (H) in the mounted
position.
11.
Using 9/16 inch socket, install two locknuts (J)
and washers (K) to hold fender skirt (H)
to both outriggers.
Coat four screws (L) with lubricant.
12.
Using 5/8 inch socket, install four screws (L)
13.
and washers (M) to hold fender skirt (H) to
air cleaner (N).
Using torque wrench and 5/8 inch socket, tighten
14.
four screws (L) to 20 to 30 lb-ft (27 to 41 N m).
15.
Install washer (P) and bolt (Q) through the top of fender skirt (H).
Place washer (R), lockwasher (S), and nut (T) on bolt (Q). Using 9/16 inch socket on bolt (Q)
16.
and 9/16 inch wrench on nut (T), tighten nut (T).
Go on to Sheet 8
7-94
