TM 5-5420-202-20-2
FUEL-WATER SEPARATOR FILTER ELEMENT REPLACEMENT (Sheet 2 of 6)
REMOVAL:
NOTE
Use suitable container to catch
fuel spillage whenever any fuel
line or fitting is loosened or re-
moved. Use cloth to wipe any
spillage. Discard cloth and
drained fuel in accordance with
local procedures.
NOTE
Clean cover and surrounding area to
make sure no dirt falls into fuel-
water separator.
1.
Using 7/16 inch wrench, remove eight
screws (A), lockwashers (B), and flat
washers (C).
2*
Remove cover (D) from fuel-water
separator (E).
3.
Remove preformed packing (F) from
cover (D). Throw away packing.
Place container under fuel-water separator
4.
(E) to catch fuel from fuel outlet line.
5.
Using 7/8 inch wrench, disconnect fuel
outlet line (G) from elbow (H).
6.
Using plastic barrier material and
1/2 inch masking tape, cover fuel
outlet line (G) to avoid getting dirt
into line.
Go on to Sheet 3
7-197
