TM 5-5420-202-20-2
MANIFOLD HEATER INPUT SOLENOID VALVE AND FUEL LINE REPLACEMENT (Sheet 7 of 10)
Input Solenoid Valve Replacement (Sheet 2 of 5)
NOTE
Use suitable container to catch fuel whenever any fuel
line or connection is loosened or disconnected. Use cloth
to wipe any spillage. Discard cloth and drained fuel in
accordance with local procedures.
REMOVAL:
Disconnect electrical lead (A) from solenoid valve (B).
1.
Using 7/16 inch and 1/2 inch wrenches, disconnect
2.
two fuel lines (C) from tee (D).
3.
Using 1/2 inch and 5/8 inch wrenches, remove
tube (E) from adapter (F).
4.
Using 5/16 inch wrench, remove two screws and
washers (G).
Using screwdriver, remove two screws (H) with
5.
lockwashers and flat washers.
Remove solenoid valve (B), fuel filter (J), and attached
6.
fittings as a unit.
TA248383
Go on to Sheet 3
7-259