TM 5-5420-202-20-2
MANIFOLD HEATER INPUT SOLENOID VALVE AND FUEL LINE REPLACEMENT (Sheet 10 of 10)
Input Solenoid Valve Replacement (Sheet 5 of 5)
Position solenoid valve (B) and fuel filter (E)
7.
with attached fittings to brackets on engine.
Install two screws (H) with lockwashers
8.
and flat washers to secure fuel filter (E)
to engine bracket. Using screwdriver, tighten
screws.
Install two screws and washers (J) to secure
9.
solenoid valve (B) to bracket. Using 5/16 inch
wrench, tighten screws.
Connect two fuel lines (K) to tee (C). Using
10.
7/16 inch wrench, tighten fuel line nuts.
Connect tube assembly (L) to adapter (M).
11.
Using 1/2 inch and 5/8 inch wrenches, tighten
hose nut to adapter.
Connect electrical lead (N) to solenoid valve (B).
12.
Operate purge pump (TM 5-5420-202-10)
13.
Check for leaks. If leaks are found, tighten
connections as required.
Install powerplant (page 5-14).
14.
TA248386
End of Task
7-262
