TM 5-5420-202-20-3
INSTRUMENT PANEL CLUSTER ASSEMBLY REPAIR (Sheet 19 of 23)
Instrument Panel Wiring Harness Replacement (Sheet 1 of 4)
TOOLS: 3/8 in. combination box and open end wrench
Flat-tip screwdriver
SUPPLIES: Silicone compound (Item 32, Appendix D)
PRELIMINARY PROCEDURE: Remove instrument panel from vehicle (page 10-111)
REMOVAL:
1. Using screwdriver, remove four screws and
lockwashers (A) securing receptacle connector
(B) to panel.
2. Using wrench, remove nut and flat washer
(C) securing harness junction (D) to panel.
Displace harness junction (D) and remove
flat washer.
3. Disconnect two leads (circuits 27 and 36) from
engine oil pressure gage (E) by pulling out.
Go on to Sheet 2
T A2 4 9 0 7 3