TM 5-5420-202-20-3
STARTER LOW VOLTAGE RELAY SOLENOID REPLACEMENT (Sheet 1 of 2)
TOOLS: Ratchet with 1/2 in. drive
5 in. extension with 1/2 in. drive
7/16 in socket with 1/2 in. drive
7/16 in. combination box
and open end wrench
Spaner wrench
Ground hop kit
SPECIAL TOOLS:
(Item 31, Chapter 3, Section I)
REFERENCES: TM 5-5420-202-10
PRELIMINARY PROCEDURES:
Remove powerplant (page 5-2)
REMOVAL:
1. Using spanner wrench unscrew electrical
plug (A) from front of relay solenoid (B).
2. Using socket, extension, and wrench, remove
two screws (C), insulators (D), and self-
locking nuts (E) securing relay solenoid
(B) to mounting bracket (F). Remove
relay solenoid.
INSPECTION:
Inspect insulator (D) and wiring harness (G) with
conector plug (A) for cracks or damage.
Replace if damaged.
Go on to Sheet 2