TM 5-5420-202-20-3
BASKET/CONTROL PANEL HEATER HARNESS REPLACEMENT (Sheet 2 of 4)
3.
Using 7/16 inch socket, remove screws
(C), lockwashers (D), and flat washers
(E) securing top end of three straps (F).
4.
Using 7/16 inch socket, remove screws (G)
and lockwashers (H) securing six clamps (J).
NOTE
This illustration shows general routing of
the harness assembly and locations of
supporting straps and clamps.
At basket disconnect,
5.
disconnect and remove
connector (K) (page 10-296.69).
6.
Remove wiring harness
from straps (F) and
clamps (J).
7.
Remove wiring harness
from vehicle.
Go on to Sheet 3
Change 7
10-296549
5- . 1
