TM 5-5420-202-20-3
ENGINE WIRING HARNESS (DUST DETECTOR) REPLACEMENT (Sheet 2 of 8)
REMOVAL:
Disconnect connectors (A) from right and left bank pressure switches (B).
1.
Using 7/16 inch socket, remove screws (C)
2.
and lockwashers (D) securing ground
leads (E) to brackets (F).
Using 7/16 inch wrench and 7/16 inch
3.
socket, remove screw (G) and nut (H)
securing clamps (J), retaining strap (K),
and pads (L) to tube assemblies (M).
Remove clamps (J) from wiring (N).
4.
Go on to Sheet 3
10-298.1
