TM 5-5420-202-20-3
FRONT FENDERS, HEADLAMP GUARDS, AND FENDER SUPPORT REPLACEMENT
(Sheet 6 of 7)
Using 1-inch socket, install support No. 2 (L) to hull, using four screws, lockwashers, and
5.
washers (M). Using torque wrench and 1-inch socket, tighten screws (M) to 125-130 lb-ft
(169-176
6.
Using 1-inch socket install support No. 1 (B) to hull (N) using four screws and lockwashers
7.
Using torque wrench a 1-inch
socket, tighten screws (P) to
125-130 lb-ft (169-176
8.
Using 9/16 inch socket, loosely install headlamp guard (Q) to hull using two screws and
washers (R).
Using 3/4 inch socket and 3/4 inch wrench,
9.
loosely install headlamp guard (Q) to hull using
two screws (S), washers (T), lockwashers (U),
and nuts (V).
10.
Using 9/16 inch socket on screws (R) and 3/4
inch socket and 3/4 inch wrench on screws (S)
and nuts (V), tighten screws and nuts. Using
torque wrench and 9/16 inch socket, tighten
screws (R) to 15-20 lb-ft (20-27
Go on to Sheet 7
TA249736
16-63