TM 5-5420-202-20-3
FENDER EXTENSION (LEFT) REPLACEMENT (Sheet 1 of 4)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
Inspection
Installation
TOOLS: 9/16 in. socket with 1/2 in. drive
9/16 in. combination box and open end wrench (2 required)
5/8 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Torque wrench with 1/2 in. drive (0-175 lb-ft)
SUPPLIES:
Lockwasher
Self-locking nuts (2 required)
Self-locking bolts (4 required)
Locking compound (Item 15, Appendix D)
REMOVAL:
NOTE
Removal is similar for left and right fender extensions.
1.
Using socket, remove two nuts (A) and flat washers (B) holding fender extension (C)
bracket (D) and bracket (E).
Go on to Sheet 2
TA249738
