TM 5-5420-202-20-4
FIXED FIRE EXTINGUISHER INTERIOR RELEASE MECHANISM CONTROL ASSEMBLY
REPLACEMENT (Sheet 3 of 7)
5.
Using fingers, grasp two cables (E) and pull out of control assemblies (F).
6.
Using 9/16 inch wrench, remove two nuts (G) from bracket (H).
7.
Use 1/2 inch end wrench to hold two screws (J) and using 1/2 inch socket and ratchet,
remove two nuts (M) and lockwashers (N). Remove screws (J), two clamps (L), and washers
(K) from two control assemblies (F).
8.
Using fingers, grasp two control assemblies (F) on side of bracket (H) away from fire
extinguisher cylinders and pull out of bracket (H).
Go on to Sheet 4
TA248676
20-18