TM 5-5420-202-20-4
SMOKE GENERATOR SWITCH COVER REPLACEMENT (Sheet 1 of 1)
TOOLS:
Cross-tip screwdriver
11/32 in. open end wrench
SUPPLIES
Lockwashers (4 required)
PRELIMINARY PROCEDURE:
Remove smoke generator switch and guard (page 21-2)
Remove smoke generator indicator light (page 21-5)
REMOVAL:
1.
Using screwdriver and 11/32 inch wrench,
remove four screws (A), flat washers
(B), lockwashers (C), and nuts (D) securing
cover (E) to mounting bracket (F).
2.
Remove cover (E).
INSTALLATION:
QUADRANTS
1.
Position cover (E) on mounting bracket
REMOVED
(F).
FOR CLARITY
Using screwdriver and 11/32 inch wrench, install and tighten four screws (A),
2.
(B), lockwashers (C), and nuts (D) securing cover (E) to mounting bracket (F). flat washers
3.
Install smoke generator indicator light (page 21-7).
4.
Install smoke generator switch and guard (page 21-3).
End of Task
TA248745