TM 5-5420-202-20-4
SMOKE GRENADE HULL COMPARTMENT WIRING HARNESS ASSEMBLY REPLACEMENT
(Sheet 1 of 11)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
Installation
TOOLS: 7/16 in. socket with 3/8 in. drive
5 in. extension with 3/8 in. drive
Ratchet with 3/8 in. drive
Slip joint pliers, conduit style, with plastic jaw inserts
Flat-tip screwdriver
Socket insert/extract tool
SUPPLIES:
Gaskets
Silicone lubricating compound (Item 32, Appendix D)
REMOVAL:
WARNING
Make sure there are no smoke
grenades in dischargers. Acciden-
tal firing of grenade could
hurt or kill you.
Set MASTER BATTERY switch (A)
1.
to OFF.
Using pliers, disconnect electrical con-
2.
nector (B) of smoke grenade hull compart-
ment wiring harness (C) from back
side of basket disconnect (D).
3.
Using socket and extension, remove
two top screws (E), lockwashers (F),
and washers (G) securing two harness
bundle straps (H) to hull.
Go on to Sheet 2
TA248794