TM 5-5420-202-20-4
GENERAL MAINTENANCE (Sheet 17 of 33)
Installation of New Studs (Sheet 1 of 1)
TOOLS: Wrench, torque
S c r e w threading set
Combination box and open end wrench (2 required)
Socket
1.
Using bottoming tap (A), clean out
threads in hole (B).
2.
Using two wrenches, install and jam
two nuts (C) onto end of new stud (D).
3.
Using socket, install new stud (D) into
hole (B).
4.
Using torque wrench, tighten new stud
(D) to r e q u i r e d value (refer to specific
maintenance procedure).
5.
Using two wrenches, remove two nuts
(C) from new stud (D).
End of Task
TA248915