TM 5-5420-203-14
CENTER SECTION MISCELLANEOUS COMPONENTS REPLACEMENT (Sheet 3 of 3)
e. Place two screws (17) through pipe anchor clamp (18). Position clamp on center section
(5). Install two new lock washers (16) and two nuts (15) on two bolts (17). Tighten nuts (15).
f. Place two flat washers (28) on two screws (26). Position angle bracket (27) on center section (5).
install two screws (26) through angle bracket and center section (5). Install two new lock
washers (25) and two nuts (24) on two screws (26). Tighten screws (26).
g. Place flat washer (33) on screw (31). Install screw (31) through spring tension clip (32). Install
screw, flat washer, and spring tension clip in mounting hole located on center section (5). Place
new lock washer (30) and nut (29) on screw (31). Tighten nut (29).
h. Place two flat washers (38) on two screws (36). Insert two screws (36) in angle bracket (37).
Place screws in mounting hole on center section (5). Place two new lock washers (35) and two
nuts (34) on two screws (36). Tighten nuts (34).
i. Place two screws (42) in pipe flange (43) and install on center section (5). Place two flat washers
(41), two new lock washers (40), and two nuts (39) on two screws (42). Tighten nuts (39).
END OF TASK
3-76