TM 5-5420-209-12
3-23. Cable Assembly, Ramp Bay.
This task covers: Service
INITIAL SETUP
Materials/Parts
Oil, Lubricating (Item 8, Appendix E)
Solvent, Dry Cleaning (Item 18, Appendix E)
Rags, Wiping (Item 12, Appendix B)
Lubricant, Exposed Wire (Item 6, Appendix E)
a. Service. (figure 3-20)
WARNING
Dry cleaning solvent PD-680 used to clean parts is potentially dangerous to personnel and property.
Avoid repeated and prolonged skin contact. DO not use near open flame or excessive heat. Flash point
of solvent is 100-138 °F (38-60 °C).
(1) Clean cable assembly (1) with dry cleaning solvent, and dry thoroughly.
(2) Lubricate cable assembly (1) with oil, and remove excess.
(3) Coat cable assembly (1) with exposed wire lubricant, and remove excess.
(4) Repeat Steps (1) through (3) for cable assembly (2).
. .
3-42