4-19. Floodlight Electrical Leads and Clamps. - Continued
b. Repair. (figure 4-5)
(1) Inspect floodlight wiring and connectors.
(2) Replace damaged or missing connectors.
(3) Replace wiring if insulation is cracked, burnt, or otherwise damaged.
(4) When replacing wiring or connectors, observe the following:
(a) Ensure power to floodlights is removed.
(b) Remove all cable clamps securing wiring to be replaced.
(c) Tag wiring to ensure proper installation of new wiring or connectors.
4-44
TM 5-5420-209-12
