4-21. Clearance and Marker Lights Electrical Leads and Clamps.
This task covers:
a. Removal
b. Repair
INITIAL SETUP
Tool
Equipment Condition:
General Mechanic’s Automotive Tool Kit
Electric system circuit breaker set to OFF,
(Item 1, Appendix B)
NOTE
The maintenance procedures are the same for all clearance and marker lights, electrical leads, and
clamps.
a. Replace. (figure 4-7)
(1)
(2)
(3)
(4)
(5)
(6)
( 7)
(8)
Tag and remove electrical leads (1) from clearance and marker lights (2).
Tag and remove electrical leads (1) from vehicle wiring.
Remove screw (3), washer (4), and remove cable clamp (5) securing electrical leads (1).
Repeat Step (3) for remaining cable clamps and remove electrical leads (1).
Inspect electrical leads (1) and cable clamps and replace all items that are worn or otherwise damaged.
Secure electrical leads (1) with cable clamp (5), screw (3), and washer (4).
Repeat Step (6) for remaining cable clamps.
Connect electrical leads (1), as tagged to clearance and marker lights (2).
TM 5-5420-209-12
4-48
