TM 5-5420-209-12
4-29. Rear Winch Assembly. - Continued
(8) Remove six screws (20) and washers (21).
(9) Remove 10 screws (22) and washers (23).
(10) Remove screw (24), lockwasher (25), and nut (26) and remove side plate (27).
(11) Remove 10 screws (28) and washer’s (29) and remove side plate (30) with bearing support (31).
(12) Remove screw (32), lockwasher (33), and nut (34) and remove tie bar (35).
(13) Remove eight screws (36) and washers (37) and remove bearing support (31) and shims (38).
(14) Remove bearing (39) from drum support (40).
(15) Remove drum (41) from base (42).
4-98
