4-29. Rear Winch Assembly. - Continued
e. Disassembly (Model PG-115-043R). (figure 4-23)
(1) Remove four screws (1) and washers (2) and remove motor (3) and gasket (4) andshim (5).
(2) Remove two screws (6) and washers (7) and remove motor adapter(8).
(3) Remove input gear assembly (9).
(4) Remove snap ring (10) and retainer ring (11).
NOTE
Springs (12), plungers (13), and rollers (14) will fall free when brake race (15) is removed from input shaft
(16).
(5) Remove brake mce (15), springs (12), plungers (13), and rollers (14) from input gear (16).
(6) Remove retaining ring (17) and snap ring (18) from input gear (16).
(7) Note location of brake port nipple (19) and remove.
TM 5-5420-209-12
4-96
