TM 5-5420-209-12
4-66. Cable Assembly. - Continued
b“ Replace. (figure 4-88)
NOTE
Bay must be in the folded position to replace cable assembly.
(1) Remove nut (1) and washer (2) and remove cable assembly (3) from cable link (4).
(2) Remove spring pin (5) and remove pin (6) and upper end of cable assembly (3) from
hinge pin (7).
(3) Apply grease to eye loop (8) and pin (6).
(4) Install upper end of cable assembly (3) and secure with pin (6) and spring pin (5).
(5) Install cable assembly (3) in cable link (4) and install washer (2) and nut (7).
(6) Adjust cable assembly.
4-236
