TM 5-5420-209-12
4-67. Cable Link, Pin and Hardware.
This task covers: Replace
INITIAL SETUP
Tools
Materials/Parts
General Mechanic’s Automotive Tool Kit
Grease, Automotive and Artillery
(Item 1, Appendix B)
(Item 2, Appendix E)
a. Replace. (figure 4-89)
(1)
(2)
(3)
(4)
(5)
(6)
Remove nut (1) and washer (2), and remove cable assembly (3) from cable link (4).
Remove cotter pin (5), nut (6), washer (7), bolt (8), and remove cable link (4) from unfolding
lever (9).
Apply grease to cable link (4).
Install cable link (4) on unfolding lever (9) and secure with bolt (8), washer (7), nut (6), and rotter pin (5).
Install cable assembly (3) in cable link (4), and secure with nut (1) and washer (2).
Adjust cable assembly (para. 4-64).
4-238
