TM 5-5420-209-12
This task covers: Replace
INITIAL SETUP
Tools
Equipment Condition:
General Mechanic’s Automotive Tool Kit
Bay unfolded (para. 2-14).
(item 1, Appendix B)
a. Replace. (figure 4-110)
NOTE
The procedures to replace connector are the same for all connectors.
(1) Remove spring (1) from connector (2) and eye bracket (3).
(2) Remove two screws (4), eye bracket (3) and connector(2).
(3) Remove pin (5) and remove connector(2).
(4) Position connector(2) with eye bracket (3) and secure with pin (5).
(5) Install eye bracket (3), connector (2) and secure with two screws (4).
(6) Install spring (1) between eye bracket (3) and connector (2).
4-280
4-84. Connector and Hardware.
