4-103.
Foldlock.
This task covers: Replace
INITIAL SETUP
Tools
Equipment Condition:
General Mechanic’s Automotive Tool Kit
Bay removed (para. 2-16).
(Item 1, Appendix B)
Cable, Adjusting Spring Scale (Item 2, Appendix B)
Materials/Parts
Grease, Automotive and Artillery (Item 2, Appendix E)
a. Replace. (figure 4-136)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Unlatch (open) foldlock (1).
Remove two springs (2) and remove two spacers (3) and pin (4).
Remove two cotter pins (5), washers (6), pin (7), and remove foldlock (1).
Remove two springs pins (8) and remove pin (9) from foldlock (1).
Apply grease to pins (4), (7), and (9).
Install pin (9) in foldlock (1) and secure with two spring pins (8).
Install foldlock (1) and secure with pin (7), two washers (6) and cotter pins (5).
Install pin (4), two spacers (3) and springs (2).
Latch (close) foldlock (1).
4-332
TM 5-5420-209-12
