Table 2-12. Operator Preventive Maintenance Checks and Services (PMCS) for the interior Bay cont.
Item
No.
67
68
69
70
71
Interval
During
During
During
During
After
Location
Item to
Service/Check
Roadway
Surface
(Curbside
Ponton)
Roadway
Connectors
Connector
Receptacles
Deck Surface
Ribbon Bridge
Components
Item To be Inspected
Procedure
Inspect for ruptured seams, holes punctures
and cracked welds.
Ensure connector is correct type.
Inspect connector, eye bracket, set screws,
spring and spring pins for cracks and
deformation.
Inspect for cracks, broken welds, elongation
and deformation.
Inspect for punctures, cracks, tears, dents,
holes and broken welds.
Check condition of non-skid coating.
After operation, clean all dirt, mud, and debris
from ribbon bridge components and lubricate
in accordance with LO 5-5420-209-12.
Equipment Is Not
Ready/Available If
Any defect allowing
water into bay cavities.
Incorrect connector type.
Any defect which
prevents proper seating
of connector.
Cracks or broken welds
noted. Elongation or
deformation prevents
proper seating of
connector.
Any damage which
allows water into bay
cavity.
2-42
TM 5-5420-209-12
