TM 5-5420-226-20-2
POWERPLANT LEFT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (Sheet 7 of 9)
NOTE
It may be necessary to pull frame (P) out and depress three
flanges (Q) on frame bottom during installation to clear pro-
truding obstacles on the engine. It may be necessary to
loosen and move brackets (B, F and L) slightly before oil
cooler support frame can be installed.
Install oil cooler support frame.
Using alining punch, aline screw
holes and, using 1/2 inch socket
with extension, install four
screws (R).
14.
U s i n g 1/2 inch socket and 1/2 inch
w r e n c h , install screw and self-locking
nut (S).
Go on to Sheet 8
TA107599
6-132
