TM 5-5420-226-20-2
POWERPLANT LEFT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (Sheet 6 of 9)
INSTALLATION:
NOTE
Because of space limitations, it may
be necessary to interchange like size
sockets with wrenches to get at a
particular screw.
1.
I n s t a l l screw (A) through bracket (B).
2.
P o s i t i o n bracket (B) and screw (A) on engine.
I n s t a l l clamp and two shims (C) on screw (A).
3.
4.
U s i n g 9/16 inch socket and 9/16 inch wrench,
i n s t a l l nut (D).
5.
U s i n g 1/2 inch socket with extension, install
nuts (E).
6.
Position bracket (F) on engine.
7.
Using 1/2 inch socket with extension
o r 1/2 inch wrench, install nuts (G).
P o s i t i o n clamp (H) on fuel line and
8.
i n s t a l l screw (J) through clamp (H)
and bracket (F).
U s i n g 1/2 inch socket and 1/2 inch
9.
w r e n c h , install nut (K) on screw (J).
10.
Using 1/2 inch socket with extension,
i n s t a l l four brackets (L).
P o s i t i o n frame support brackets (M) on
11.
e n g i n e and, using 11/ 16 inch socket, in-
s t a l l two locknuts (N) to secure each
frame support bracket (M).
Go on to Sheet 7