TM 5-5420-226-20-2
AIR CLEANER REPLACEMENT (Sheet 2 of 8)
REMOVAL:
1.
Using 3/8 inch wrench, loosen clamp
2.
(A) nut holding inlet hose (B) to
inlet elbow (C).
Separate hose (B) far enough from
3.
inlet elbow (C) to allow air cleaner
to be removed without pulling hose.
Pull air cleaner electrical lead (D)
4.
from harness connector (E).
5.
Using screwdriver, loosen clamp (F)
securing air cleaner outlet hose (G)
to turbocharger.
6.
Disconnect hose from air cleaner
elbow (H).
NOTE
If right air cleaner is being removed,
do steps 7 and 8 and then go on to
step 9.
If left air cleaner is being
removed, skip steps 7 and 8 and
goon to step 9.
7.
Using 9/16 inch wrench, loosen nut (J).
8.
Using 9/16 inch wrench, disconnect hose
(K) from air cleaner elbow (H).
Go on to Sheet 3
TA107691
7-86