TM 5-5420-226-20-2
CONDENSATE RELIEF VALVE REPLACEMENT (LEFT OR RIGHT) (Sheet 3 of 4)
CLEANING AND INSPECTION:
1. Using dry cleaning solvent.
2. Inspect components for cracks or breaks. Replace unserviceable components.
3. Using 6 inch ruler as measure, replace spring if free length is less than 1 inch.
INSTALLATION:
1.
Position three ball bearings (A), new preformed packing (B), and spring (C) on pipe
adapter (D).
2. Press connector sleeve (E) down on
pipe adapter (D). Using pliers,
install retaining ring (F).
3.
Remove rags from fuel tank.
4.
Using 1-3/4 inch wrench, install
pipe adapter (D) in fuel tank (G).
5.
Press down on connector
sleeve (E) and install plug (H).
6.
Using slip joint pliers, install
chain (J) on plug (H).
Go on to Sheet 4
