TM 5-5420-226-20-2
FUEL SHUTOFF CABLE ASSEMBLY REPLACEMENT (Sheet 11 of 15)
If old grommet (L) was removed,
7.
install new grommet (L) onto
cable assembly (H).
Apply adhesive to bushing (M)
8.
and install inside grommet (L)
onto cable assembly (H). Insert
grommet (L) with bushing (M) into
bulkhead connector (K).
Using screwdriver, install clamp
9.
(N) on the outside of grommet
(L). Tighten clamp (N).
10. Install and position clamps (p)
and (Q) onto cable assembly (H).
11. Using 7/16 inch socket, install
two screws (R) and lockwashers
(S) securing clamps into position.
TA107782
Go on to Sheet 12
7-175