TM 5-5420 -226-20-3
ENGINE GENERATOR REPLACEMENT (Sheet 2 of 8)
Using 9/16 inch socket,
2.
remove nut and flat washer (B).
Disconnect cable (C) and two electrical
leads (D) from terminal marked "B"
(E).
Using 3/8 inch socket, remove
nut and flat washer (F).
Disconnect electrical lead (G) from
terminal marked "D" (CKT 478) (H).
Using 3/8 inch socket, remove
6.
nut and flat washer (J).
Disconnect electrical lead (K) from
7.
terminal marked "A", (CKT 1) (L).
Using 9/16 inch socket, remove
8.
nut and flat washer (M).
Disconnect ground lead (N).
9.
Using 1/2 inch socket, remove screw and lockwasher (P).
10.
11.
Disconnect electrical lead (Q).
12.
Using spanner wrench, remove electrical connector (R).
Go on to Sheet 3
TA168658
10-7
