TM 5-5420 -226-20-3
STARTER REPLACEMENT (Sheet 2 of 7)
REMOVAL:
Using 3/4 inch wrench, remove nut and
1.
lockwasher (A) securing ground straps (B),
heavy cables (C and D), and light cable
(E) to terminal (F) on front of starter (G).
Remove all cables and tag.
2.
3. Using 3/4 inch socket, remove nut,
external tooth lockwasher, and split
lockwasher (H) securing two heavy
cables (J) and (K), and one light cable
(L) to terminal on front of starter
relay solenoid (M).
4. Remove all cables and tag.
5. Using screwdriver, remove screw and
external tooth lockwasher (N)
securing cable (P) to terminal at
lower front of starter switch relay
solenoid (M). Remove cable and tag.
TA168673
Go on to Sheet 3
10-22