TM 5-5420-226-20-3
MASTER RELAY MOUNTING PLATE AND BRACKET REPLACEMENT (Sheet 2 of 2)
INSTALLATION:
1.
Using hammer, tap eight new nuts (A) into plate (B).
2.
Place plate (B) in position on hull floor.
Using 9/16 inch socket, install two screws (C) and lockwashers (D) securing plate (B)
3.
to hull floor.
Using 9/16 inch socket, install two screws (E), lockwashers (F), and flat washers (G)
4.
securing plate (B) to hull floor.
Place two washers (H) in position on plate (B).
5.
Place mounting bracket (J) in position on plate (B).
6.
Using 1/2 inch socket, install two screws (K) and lockwashers (L) securing
7.
mounting bracket (J) to plate (B).
8.
Install master relay assembly (page 10-139).
End of Task
TA168812
10-162
