TM 5-5420-226-20-3
HEADLIGHT ASSEMBLY (LEFT AND RIGHT) REPLACEMENT (Sheet 1 of 1)
TOOLS: Hammer
REFERENCES: TM 5-5420-226-10
NOTE
Some rings may be too tight to
loosen with fingers. Tap with
hammer until Ioose. Then do
steps 1 and 2.
REMOVAL:
1. Using fingers, turn ring (A) counter-
clockwise while lifting headlight (B)
away from base assembly (C).
2. Remove headlamp (B).
1. Place headlight (B) in position on base
assembly (C).
2. Using fingers, turn ring (A) clockwise
while pressing down on headight (B).
Tighten ring.
3. Check operation of headlight assembly (TM 5-5420-226-10).
TA168823
End of Task