TM 5-5420-226-20-3
NEUTRAL SHlFT SWITCH ASSEMBLY REPLACEMENT (Sheet 1 of 2)
TOOLS: 10 in. adjustable wrench
Flat-tip screwdriver 2 in. blade
Silicone compound (Item 32, Appendix D)
SUPPLIES:
PRELIMINARY PROCEDURES: Remove transmission shroud (page 9-2)
NOTE
Screws holding switch may be reversed.
REMOVAL:
1. Using wrench on nuts (A) and screwdriver on
screws (B) (hidden), remove two screws, lockwasher,
and nuts.
2. Disconnect two electrical connectors (C) from neutral
shift switch (D).
3. Remove neutral shift switch (D).
TA168887
Go on to Sheet 2
