TM 5-5420-226-20-3
ENGINE STARTER WIRING HARNESSES REPLACEMENT (Sheet 2 of 7)
REMOVAL:
1. Using diagonal pliers, cut all cable ties (A).
Using 3/4 inch wrench, remove nut and
2.
lockwasher (B). Remove heavy cable
(C) and (D) and ground strap (E) from
starter (F). Do not remove small cable (G).
Using 3/4 inch wrench, remove nut and
3.
lockwasher (H). Remove heavy cables (J)
and (K) and light cable (L) from solenoid
relay (M).
4.
Using 1/2 inch socket and extension, remove
screws (N) from cable clamps (P). Remove
cable clamps.
TA168926
Go on to Sheet 3
10-275
