TM 5-5420-226 -20-3
ENGINE WIRING HARNESS REPLACEMENT (Sheet 2 of 12)
REMOVAL:
1. Using flat-tip screwdriver and 3/8 inch
wrench, remove four screws, lock-
.
washer
and nuts (A). -
2. Remove engine harness (B) from
mounting bracket (C).
3. Using 7/16 inch socket, remove eight
screws (D) and lockwashers (E) secur-
ing four clamps (F).
4. Remove four clamps (F) from engine.
NOTE
Engine wiring harness is wrapped
while other two harness leads are
covered with insulation.
5. Separate and remove engine wiring
harness (B) from top of engine.
Go on to Sheet 3
TA168938
10-287
