TM 5-5420-226-20-3
ENGINE WIRING HARNESS DUST DETECTOR) REPLACEMENT (Sheet 2 of 8)
REMOVAL:
1.
Disconnect connectors (A) from right and left bank pressure switches (B).
2.
Using 7/16 inch socket, remove screws (C)
and lockwashers (D) securing ground
leads (E) to brackets (F).
3.
Using 7/16 inch wrench and 7/16 inch
socket, remove screw (G) and nut (H)
securing clamps (J), retaining strap (K),
and pads (L) to tube assemblies (M).
Go on to Sheet 3
Change 1