TM 5-5420-226-20-3
SHIFTING CONTROL AND RELATED PARTS REPAIR AND REPLACEMENT (Sheet 3 of 14)
Using 9/16 inch wrench, remove bolt
4.
(F) securing link (G) to rod (H). Let
rod (H) drop below floor.
Using socket, extension, and ratchet,
5.
remove four screws (J), lockwashers
(K), and flat washers (L) from bracket
assembly (M).
6.
Move parking brake control assembly
(N) aside.
7.
Using socket, extension, and ratchet,
remove three screws (P), lockwashers
(Q) and flat washers (R) from base assembly
(S).
8.
Remove base assembly (S) and bracket
assembly (M) as a single unit from vehicle.
Using pencil and masking tape, tag all
9.
shims (T) found under bases (S) and (M).
TA169006
Go on to Sheet 4
11-4