TM 5-5420-226-20-3
TRANSMISSION MAIN OIL FILTER ELEMENT REPLACEMENT (Sheet 1 of 7)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Cleaning and Inspection
Installation
TOOLS: 9/16 in. socket with 1/2 in. drive
Diagonal cutting pliers
7/16 in. socket with 1/2 in. drive
Putty knife
5 in. extension with 1/2 in. drive
Slip joint pliers
1 in. combination box and open end wrench
Snap ring pliers
Torque wrench with 1/2 in. drive
Ratchet with 1/2 in. drive
SUPPLIES:
Filter cover gasket 7707232
Clean rags (Item 65, Appendix D)
Dry cleaning solvent (Item 55, Appendix D)
Locking wire (Item 61, Appendix D)
Two 1/4 in. x 20 NF x 3 in. long bolts
PRELIMINARY PROCEDURES:
Remove top deck (page 16-21)
Remove transmission shroud (page 9-2)
REMOVAL:
NOTE
Some filter assemblies are secured with nuts and threaded
studs instead of bolts and Iockwashers.
1. Using 9/16 inch socket with 5 inch extension, remove 10 bolts (A) and lockwashers
(B) holding filter assembly (C) to front of transmission.
TA169091
Go on to Sheet 2
