TM 5-5420-226-20-3
TRACK SUPPORT ROLLER ASSEMBLY REPAIR (Sheet 4 of 4 )
ASSEMBLY:
Place wheels (A) onto hub (B).
1.
2.
Using socket, 5 inch extension, and ratchet, install six screws (C) to each wheel (A).
3.
Using torque wrench, tighten all 12 screws (C) to 1 10-130 lb-ft (149 - 17 6 NZm).
Position outer wheel bearing cup (D) with
4.
its smallest end toward center of hub (B).
Install bearing inserter set over edge of cup (D).
5.
6.
Screw handle into bearing inserter set.
7.
Tap handle to seat outer cup (D) in hub (B).