TM 5-5420-226-20-3
STEERING CONTROL TO TRANSMISSION SHAFT CONNECTING LINK REPLACEMENT
(Sheet 2 of 2)
INSTALLATION:
1.
Position link (A) over stud (B) with blind splines alined.
Using wrench, install nut (C) and washer (D) on stud (B). Using socket and torque wrench
2.
tighten nut (C) to 15-20 lb-ft (20-27 N m).
Using pliers, install new cotter pin (E) through nut (C) and stud (B).
3.
Position rod end (F) in link (A).
4.
Using wrench, install screw (G). Using socket and torque wrench, tighten screw
5.
(G) to 15-20 lb-ft (20-27 N m).
Using socket and wrench on bolt (H) and nut (J), install bolt (H) and nut (J) on link (A).
6.
7.
Install transmission shroud (page 9-6).
8.
Install top deck (page 16-23).
End of Task
TA169380
15-20