TM 5-5420-226-20-3
CONNECTING LINK REPLACEMENT (Sheet 1 of 2)
Pliers, slip joint
TOOLS:
7/16 in. box wrench
3/4 in. box wrench
9/16 in. box wrench
Remove powerplant (page 5-2)
PRELIMINARY PROCEDURE:
Using pliers, remove cotter pin (A).
1.
Using 3/4 inch wrench, remove nut (B) and washer (C).
2.
Using 7/16 inch wrench, remove screw (D) and washer (E)
3.
Remove shield (F).
4.
Using 9/1 6 inch wrench, remove two bolts (G) from connecting rods (H) rod (J).
5.
Remove connecting rods (H) and (J) from link (K).
6.
7.
Using hands, remove washer (L), connecting link (K), and washer (M) from shaft (N).
Go on to Sheet 2
TA169384
