TM 5-5420-226-20-3
FRONT FENDER PLATE NO. 3 AND PANEL REPLACEMENT (Sheet 1 of 3)
TOOLS: 9/16 in. combination box and open end wrench
9/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Removal and installation procedure is the
same for both left and right sides.
REMOVAL:
U s i n g socket, screws (A), lockwashers (B), and washers (C).
1.
Using socket, remove two locknuts (D) and
2.
washers (E).
Using socket and wrench, remove four
3.
screws (F), eight flat washers (G), and four
nuts (H).
Remove plate (J).
4.
Go on to Sheet 2
