TM 5-5420-227-24
CHAPTER 2
MAINTENANCE INSTRUCTIONS
Section L REPAIR PARTS, SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT
COMMON TOOLS AND EQUIPMENT
For authorized common tools and equipment, refer to the Modified Table of Organization and
Equipment (MTOE) applicable to your unit.
SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT
Special tools for organizational, direct support, and general support maintenance are listed in
T M 5-5420-226-20P and TM 5-5420-226-34P, which are the authority for requisitioning
replacements.
SPARE AND REPAIR PARTS
Spares and repair parts are listed and illustrated in TM 5-5420-226-20P and TM 5-5420-226-34P
which are the authority for requisitioning replacements.
Section IL SERVICE UPON RECEIPT
This section contains information on services to be performed upon issue of the vehicle to
1.
the using organization. Where practicable, the crew will assist in services described. For
services to be performed on the vehicle hull components, refer to TM 5-5420-226-34. Some
o f the services contained herein may not be required, depending upon the degree of
preservation provided by the shipper and the planned use of the vehicle.
2.
Cut hold-down straps and remove wooden boxes, containers of equipment, and any other
tank components secured to the exterior or interior of the vehicle.
a. Inspect the equipment for damage incurred during shipment. If the equipment has
been damaged, report the damage on Standard Form 364 (Report of Discrepancy)
(ROD).
b. Check the equipment against the packing slip to see if the shipment is complete. Report
all discrepancies in accordance with the instructions of DA PAM 738-750.
c. Check to see whether the equipment has been modified. Reference shall be made to
the authorized equipment configuration changes list in chapter 1.
3.
Conduct service upon receipt of the vehicle in accordance with the procedures specified in
the following table.
Change 1 2 - 1
